Page 2 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
ASSEMBLY:
1
. Set Console (H) into place and adjust Levelers as necessary.
2.
OPTIONAL: If using
Cabinets and/or Hutches (sold separately) with Console, assemble units per instructions then slide
Cabinet next to Console and attach using Connector Brackets (E) with Allen Bolts (A), Flat Washer (B)
and Lock Washer (C). Tighten and secure using Allen Wrench (D).
1
(G)
2
Units must be attached together
using Connector Bracket and Bolts
as outlined in this step!
ANTI-TIP SAFETY FEATURE
ADJUSTABLE SHELVES:
Shelves (G) ship pre-installed
inside Console. Each may be height adjusted by lifting out
then removing and relocating each Shelf Support. Replace
shelf by carefully setting level upon supports.
NOTE
(E)
(B)
(C)
(A)
(D)
* Designed for use with Grove Cabinets with or
without Hutches (MQ123/MQ124) which are
SOLD SEPARATELY.
LEVELERS
:
Console is equipped with
Rotary Levelers installed under each corner.
If necessary, adjustments may be made by
carefully lifting applicable corner and turning
Leveler clockwise/counterclockwise.
Console may be configured with
or without Cabinets and Hutches.
NOTE
Attach single Cabinet using a
Connector Bracket here.
Attach Cabinet/Hutch using two
Connector Brackets here.
