Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as
they can damage the finish. Dust with soft cloth.
Ltr.
A
4
Qty.
Hardware Included
WALL ANCHORING (ANTI-TIP) HARDWARE INSTALLATION
B
C
4
2
Screws
D-Ring Brackets
Retention Belts
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit.
2. Corresponding to Stud location, attach one Bracket (B) to back of unit using Screw (A).
3. To keep hardware out of view after installation, attach remaining Bracket (B)
INTO WALL STUD
with Screw (A) 2 inches below Bracket attached to back of unit.
4. Move unit into place, align Brackets then connect both using Retention Belt (C).
5. Confirm Belt is securely laced and locked.
(A)
(B)
(C)
WALL S
TUD
WALL BRACKET MUST BE ATTACHED TO WALL STUD
x2
x2
Repre
senta
tive F
urnitu
re Ite
m
(A)
