Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Page 3 of 4
Cleaning & Care
Do not use alcohol based products or spray polisher as finish damage may result.
Periodically dust with a soft, dry cloth.
STEP 1: Carefully lift Hutch (F) and place on top of Desk (G). Center and align then join both together
by placing Connector Brackets (B) as illustrated below and securing with Screws (A).
WARNING: To prevent tip-over, Connector Brackets (B) must be used to join units.
STEP 2: Determine location for each Shelf (H) then insert Shelf Supports (C) into corresponding
pre-drilled holes. Carefully set each Shelf level upon Supports.
(A)
(B)
NOTE: Attach the
Brackets near the edges
for the best support.
(C)
(H)