800.367.2810
www.ballarddesigns.com
STEP 1:
Leg Installation
Page 2 of 3
2010 Ballard Designs, Inc.
Lay Table Top (D) upsidedown.
DO NOT remove any of the protective wrapping before.
Then attach the Base (E) to the Table Top (D) with a Bolt (A) and Washer (B) on each corner.
Use the given Tool (C) to partially tighten the Bolts on each corner, making sure
they are all aligned and then tightening them all the way. For additional torque, place a
screwdriver thought the top holes of the Tool (C) and then tighten.
Flip Table upright and remove plastic wrapping.
Be careful of the legs when flipping the table upright. Check to make sure the
Table Top is locked together underneath the Top so the table sits level.
(E)
(D)
(D)
(C)
(B)
(A)
