Ballard Designs CASA Florentina Tarvine Double Pedestal Dining Table... Assembly Instructions Download

Page: 3 / 3

STEP 3:

Leaf Installation

STEP 2:

Top Installation

Page 3 of 3

2010 Ballard Designs, Inc.

800.367.2810

www.ballarddesigns.com

Align the holes of the table Top (F) with the holes of the Legs (G)

and using the Bolts (A) and Washers (B), attach the legs on all 4 sides of the table.

Unlock the Table Top (F) and pull it apart to allow room for the Leaf.

The lock is underneath the Table Top (F). Place the Leaf (I) on the guide rails underneath

the Table Top. Then slide the Top together, making sure to align the pegs and holes

on the Leaf and Top. Lock the Leaf (I) in place.

(I)

(G)

(F)

(B)

(A)

(UNLOCK)

Cleaning & Care:

DO NOT use alcohol based products or spray polisher as they can damage the finish.

Dust with soft cloth. One to two times monthly apply beeswax polish as needed.

Finish can be affected by heat or extended contact with oils or wine.

Summary of Contents for CASA Florentina Tarvine Double Pedestal Dining Table...

Page 1: ...ercial use Made in Italy Page 1 of 3 2010 Ballard Designs Inc Check to ensure that you have the following Hardware Included y t Q r t L Part List y t Q r t L F G I H 1 2 2 1 Top Legs Leaves Rail A 8 Bolts B 8 Washers C 2 Long Bolts D 2 Small Washers E Tool 1 800 367 2810 www ballarddesigns com For Assembly Purposes Requires 2 people Requires a wrench ...

Page 2: ...Top F upside down on the floor with the protective wrapping intact Then place the Legs G on the Top F Install the Rail H into the legs with the pre installed pegs Using the Long Bolts C and the Small Washers D attach the Rail to the Legs Be sure the Rail is installed so the bolt holes will not be seen H G G F D C ...