Page 3 of 4
(A)
(C)
(D)
STEP 1:
Lay Desk (C) back down onto a level, padded surface. Fit a Leg (D) into each corner, aligning
holes in Metal Bracket with both holes in Leg. Insert, turn and tighten two Bolts (A) using a Screwdriver.
Assemble in location for intended use.
CAUTION: Do not palce uneven pressure on Legs as Desk is turned upright.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
LEVELERS
: Legs are equipped with Rotary
Levelers installed under each. If necessary,
adjustments may be made by turning Leveler
clockwise/counterclockwise.
STEP 2:
Move assembled desk into place and level as necessary. Level unit BEFORE anchoring to
wall.
