Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(E)
(D)
STEP 2: Determine location for each Shelf (F) then insert Shelf Supports (B) into corresponding
pre-drilled holes. Carefully set each Shelf level upon Supports with notched side oriented to back of
Armoire.
(B)
(F)
Fixed Shelf
(not adjustable)
Front
Back
STEP 1: Onto a clean, level, padded surface, place Armoire (D) on its back. Insert Feet (E) into t-nuts
embedded in corners. Hand tighten until fully secured. Do not over tighten.
CAUTION: Prevent damage. When turning Armoire upright
DO NOT PLACE UNEVEN PRESSURE ON FEET.
Assemble in location for intended use.
