Ltr. Qty.
Hardware Included
F
2
G
2
H
4
I
2
Small Screw
Large Screw
Brackets
Retention Belt
(H)
(F)
(H)
(G)
(I)
ANTI-TIP ANCHORING HARDWARE (Part F)
WALL STUD
Serious or fatal crushing injuries can occur from a furniture tip-over
WARNING
Tip-Over Hazard
WALL BRACKET MUST BE ATTACHED TO WALL STUD
Prevent tipping accidents. Anchor your furniture.
1. Locate and mark a Wall Stud behind Bookcase at location for installation.
2. Corresponding to Stud location, attach one Bracket (C) to back of Bookcase using Small Screw (B).
3. To keep hardware out of view after installation, attach remaining Bracket (C)
INTO WALL STUD
with Large Screw (A) 2 inches below Bracket attached to back of Bookcase.
4. Move Bookcase into place, align Brackets then connect both using Retention Belt (D).
5. Confirm Belt is securely laced and locked.
Anti-Tip Hardware Installation
Bookcase
Wall Stud
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Page 6 of 6
