Ballard Designs BUNNY WILLIAMS MA232 Manual Download Page 7

Page: 7 / 7

Page 7 of 7

STEP 9:

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

NOTE: Assemble the Hutch in desired location for use.

If joining the Hutch with a Left or Right Cabinet (MA229 / MA230), remove the side

mouldings on the side(s) being joined to.

STEP 10: Slide the Right & Left Cabinets (MA229 & MA230) next to the Hutch. Install the Right

and Left Cabinet per the instructions provided with the units.

NOTE: Installing the L-Brackets (C) to a Wall Stud for each additional unit

(MA229/MA230) is REQUIRED before any use of the product for customer safety.

(MA229)

(MA230)

Summary of Contents for BUNNY WILLIAMS MA232

Page 1: ...enter Hutch ITEM NUMBER MA232 DIMENSIONS OF ITEM ASSEMBLED 65 1 4 H x 42 W x 19 1 4 D PRODUCTS ARE NOT INTENDED FOR COMMERCIAL USE UPDATE 2 17 2017 Page 1 of 7 Customer Service 800 367 2810 Online www ballarddesigns com MADE IN CHINA ...

Page 3: ...ns com NOTE Assemble the Hutch in desired location for use STEP 2 Screw the Finials H into the top corners of the Hutch B G H Place the Shelf Supports B at the desired heights and lay the Shelves G on the Supports The plate groove should be located at the back of the Hutch ...

Page 4: ...se Carefully place the Hutch onto the Console MA231 STEP 4 Connect the Hutch to the Base by centering the Brackets F evenly over the Hutch and the top bar on the Base with two screws holes on each side as shown Secure into place using the Small Screws E MA231 MA232 F E NOTE Attach the Brackets near the edges for the best support ...

Page 7: ...net MA229 MA230 remove the side mouldings on the side s being joined to STEP 10 Slide the Right Left Cabinets MA229 MA230 next to the Hutch Install the Right and Left Cabinet per the instructions provided with the units NOTE Installing the L Brackets C to a Wall Stud for each additional unit MA229 MA230 is REQUIRED before any use of the product for customer safety MA229 MA230 ...