Page 3 of 4
Turn the Top Frame (J) upside down on a smooth, clean surface such as the packaging
provided. Loosely attach the Table Legs (L) to the Top Frame with the Hex Bolts (A),
Large Lock Washers (B), and Large Washers (C).
STEP 2:
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1:
WARNING: Aluminum is a soft metal and over-tightening will strip the thread or break the part.
(A)
(B)
(C)
Loosely attach the Bottom Frame (K) to the Legs (L) by screwing in the Allen Bolts (D),
Small Lock Washers (E), and Small Washers (F) from the inside of the center plate
with the Allen Wrench (H). Then place the Plastic Caps (G) on the Allen Bolts.
After the Bottom Frame is attached, fully tighten all bolts on the Table Top (J).
(J)
(L)
(K)
(L)
(J)
(D)
(E)
(F)
(G)
