STEP 1:
Invert Arched Top (F) onto a level, padded surface and attach a Top Bracket (G) to each
corner using four Allen Screws (A) as illustrated. Hand tighten until secured.
STEP 2:
Locate a Left and Right Side (H,I). Note that each Side has a high and low upright. Attach
Bracket (J) to higher upright and secure by inserting and tightening a Finial (K) until secured. Next,
attach Bracket (L) to lower upright and secure using three Allen Screws (A). Hand tighten until secured.
IMPORTANT: Take note of illustration for this step to ensure proper assembly.
NOTICE: Steps 2 through 5 are repeated to create both LEFT and RIGHT Side Assemblies.
Page 3 of 5
(G)
(F)
(A) x 4
(H)
(I)
(J)
(K)
(L)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
Higher Upright
Lower Upright
(A) x 3
