Ballard Designs Ananda MS114 Quick Start Manual Download Page 3

Page: 3 / 4

Page 3 of 4

STEP 1: Invert Top (E) onto a clean, soft, level surface then insert Brackets (G,H) as illustrated below.

NOTE: Brackets #1 and #2 must be installed opposite one another on the same end.

STEP 2: Carefully align each Leg (F) between Brackets (G,H) then attach by inserting Allen Bolt (A)

with Flat Washer (B) and firmly tightening using Allen Wrench (C).

(A)

(B)

(F)

(G)

(H)

(G)

(H)

(E)

(C)

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

Summary of Contents for Ananda MS114

Page 1: ...ED FOR COMMERCIAL USE UPDATED 12 15 2020 Page 1 of 4 PRODUCT NAME Ananda Serving Table ITEM NUMBER MS114 ASSEMBLED DIMENSIONS 33 H x 81 1 2 W x 12 D MADE IN CHINA Customer Service 800 367 2810 Online...

Page 2: ...are retain all carton contents until assembly and installation are complete Allen Bolts Flat Washers Allen Wrench 2 Wall Anchoring Anti tip Kits See page 4 F G H 2 2 WARNING Tip Over Hazard Prevent ti...

Page 3: ...NOTE Brackets 1 and 2 must be installed opposite one another on the same end STEP 2 Carefully align each Leg F between Brackets G H then attach by inserting Allen Bolt A with Flat Washer B and firmly...

Page 4: ...Screw B 3 To keep hardware out of view after installation attach remaining Bracket C INTO WALL STUD with Large Screw A 2 inches below Bracket attached to back of unit 4 Move unit into place align Bra...