Contact us for assistance: (866) 985-7877 | www.wtliving.com
4
1
Attach the
End Panels
C
and
D
t
o the
Seat
B
with
6
Bolts
w/ Washers
2
as shown. Tighten using the
Hex
Wrench
.
2
Install
the
Seat
Back
A
by
aligning
the
holes drilled
through the small extensions at the bottom of the
Seat Back
with the lower eyelets
at the insides of the
rear
of each E
nd Panel
.
Insert
a
Bo
lt w/
Washer
2
through the holes in the
Seat Back
and into the
eyelets in each
Side Panel
.
Tighten using the
Hex
Wrench
.
Align the eyelets above the previously aligned holes
in the
Seat Back
with the holes at the top rear corner
of the
Side Panels
. Insert a
Bolt w/ Washer
1
through
each
Side Panel
into the
Seat Back
and tighten using
the
Hex Wrench
.
Hardware Used:
2
Bolts
w/ Washers
(6x
4
0mm)
x
6
Hardware Used:
2
Bolts
w/ Washers
(6x
4
0mm)
x2
1
Bolts w/ Washers (6x60mm)
x2
ASSEMBLY
PrEParaTion
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are
missing,
please contact Customer Service at (866)
985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email
[email protected].
Place all parts on a
soft, level surface for assembly. Estimated Assembly Time: 15 Minutes | Do NOT overtighten hardware!
Check all hardware. Your
Miles Wicker B
ench
is now ready for use!
A
1
2
2
1
C
D
2
B