
Á>UÁ¿É¸¿tµ¿>¸¸¸Á>Ug[¿¿£l½½¤¿lu¼l¼¼¿¿N¿¿ÑÑѦ
L>ggg¦U
¿¿¿¿¿¿w
PREPARATION
ASSEMBLY
A
C
Hardware Used:
C
¿
Bolt
½¢
6x4
Õ
£
x3
¿
Washer
½¢
16mm
£
x3
Place the
Seat
B
upside
-
down on a
table or counter with the curved portion of the seat facing
the edge of the table.
Turn the
Chair Back
A
upside-down and align the holes near each end and at the center of the
horizontal cross-bar with the holes in the U-shaped seat support of the
Seat
, as shown.
Insert a
Bolt
C
with
Washer
D
into each of the aligned sets of holes. Tighten gently but firmly
with
the
H
ex Wrench
. DO NOT over-tighten hardware.
Over-tightening can
strip the
hardware threads.
When all hardware is securely installed,
carefully
turn the chair right-side up.
Your
Arles Bistro Chair
is ready for use
!
B
D
E
Before beginning assembly, be sure to empty the contents of the carton and make sure all parts are
present. If any parts are missing, please contact Customer Service.
Place all parts on a nonabrasive, level surface for assembly. A countertop or table is ideal.
Estimated Assembly Time: 15
m
inutes
DO NOT over-tighten hardware. Over-tightening
can strip hardware threads
.
TI
P:
Before beginning assembly, place a
Washer
D
on each of the 3
Bolts
C
.