ASSEMBLY INSTRUCTIONS
SAFETY INSTRUCTIONS
Step 7: Assembly is complete.
Lighting Instructions
1. Open the screen door using the fire tool, put the firewood/charcoal on the grate. Do not
overload the fireplace.
2. Put dry wood scraps under firewood/charcoal, light them, and close the screen door.
3. Put the fire out completely before leaving.
4. Make sure the fire is completely out before cleaning the fire bowl.
5. Care, maintain, and clean the fireplace.
Inspecting
This fireplace should be inspected on a regular basis to ensure product safety extended life.
DO NOT attempt to inspect this fireplace until the fire is COMPLETELY out and cooled down.
1. Check components for any signs of damage or rust.
2. If damage to any component is detected, do not operate until repairs are made.
3. Over kindling, place a layer of dry seasoned hardwood that covers no more than 3/4 the diameter
of the bowl.
Cleaning
This fireplace should be cleaned on a regular basis to promote safer experiences and extended
life.
Note: After repeated use, a slight discoloration of the finish may occur.
DO NOT attempt to clean this fireplace until the fire is COMPLETELY out and cooled down.
DO NOT use oven or abrasive cleaners as they will damage this product.
DO NOT clean any part of this fireplace in a self-cleaning oven as it may damage its finish.
1. Wipe the exterior surface with a mild dishwashing detergent or baking soda.
2. Store this fireplace in a dry location to maximize its life.
3. Clean with water.
Storing
DO NOT move or store this fireplace until the fire is COMPLETELY out and cooled down.
1.Once the fire is out (fireplace is cool to the touch), remove ashes and properly dispose.
4. Cover the outdoor fireplace with a PVC cover (not included).
2. Store this fireplace in a dry location to maximize its life.
3. Store assembled in a location away from children and pets.
CARE AND MAINTENANCE
6
