ASSEMBLY INSTRUCTIONS
Hardware Used
1
4
CARE AND MAINTENANCE
Inspecting
Inspect this item on a regular basis to ensure product safety and longer product life.
DO NOT attempt to inspect this item until the fire is COMPLETELY out and cooled down.
Check components for any signs of damage or rust.
If any component is damaged, do not use
until repairs are made.
Cleaning
Clean this item on a regular basis to promote safer use and longer product life.
Note: After repeated use, the finish may discolor slightly.
DO NOT attempt to clean this item until the fire is COMPLETELY out and cooled down.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this item in a self-cleaning oven as it may damage this finish.
Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
For stubborn surfaces use a citrus-based degreaser and a nylon scrubbing brush.
Rinse clean with water.
Remove built-up creosote from components with a chimney cleaning product.
Storage
DO NOT move or store this item until the fire is COMPLETELY out and cooled down.
Once the fire is out, coals are cold and item is cool to touch, remove ashes and
properly dispose.
Store in a location away from children and pets.
Note: If you do not use a cover, store this item in a dry location to maximize product life.
A
C
B
1. Remove M8 nuts (B) from M8 x 10 mm bolts (C).
Connect the fire ring panels (A) with M8 x 10 mm
bolts (C) and secure with M8 nuts (B).
C: M8 x 10 mm bolt x 12
B: M8 nut x 12
