Use and maintenance manual
Chipping machine BF150
4
1
GENERAL INFORMATION
The models presented in this manual are exclusively designed for shredding and chipping branches,
pruning residues, brushwood, wood products in general in order to obtain chips and a uniform product
suitable for composting.
The use of original spare parts and accessories is recommended. In addition to invalidating the
warranty, non-original parts could be dangerous and reduce the life and performance of the machine.
The BALFOR s.r.l. company has compiled this manual to assist you in the maintenance and use of this
machine, which, despite being an easy-to-use tool, requires you to scrupulously observe what follows in
order to avoid damage to the machine and accidents to the operator.
COPYRIGHT BY BALFOR s.r.l.
All rights reserved regarding this "Instructions for use and maintenance"
manual belong to the Manufacturer. All information (text, drawings,
diagrams, etc.) contained herein is reserved. No part of this manual may
be reproduced or distributed (whether in whole or in part) by any means of
reproduction (photocopies, microfilm or other) without the Manufacturer's
written permission.
The desire to save energy and use renewable sources is behind the decision to invest in highly
sophisticated equipment that allows substantial autonomy.
All of
BALFOR
's production is manufactured using exclusively solar energy.
The company has adopted a
powder coating
system with advantages from a qualitative and ecological
point of view as it does not create any kind of problem for either the operators or the environment.
