VIGIL EVAS BVRD2M
Operating Instructions
20
BVRD2M issue 2
C O M M U N I C A T I O N S
3.2 F
RONT
P
ANEL
N
AVIGATION
C
ONTROLS
Figure 3.1 — BVRD2M Front Panel
A
Access Control /
System Configuration
Key Switch
Unless Key is turned (and password entered), access to
configuration options is not available to prevent
unauthorised or accidental changes to system setup
B
40 x 2 Character LCD
Display
Shows either the current system status, or, if in
Configuration mode the options and menus available
C
Multi Function Encoder Used for changing values and entering text when in
Configuration Mode
D
Left navigation button
Press to move left through available menus and options
E
Right navigation button Press to move right through available menus and options
F
"Select" navigation
button
Press to choose the currently selected option
G
"Back" navigation
button
Press to move back to the previous menu
H
Status LEDs
"VA Active"
- Emergency Message or Broadcast Active
"OK"
- No faults detected
"General Fault"
- Fault detected, shown on LCD Display
"System Fault"
- Critical Fault that requires manual
intervention to clear. Potentially Fail Safe operation only
available (hard wired All Call on Mic 1 & 2 and EM message
will operate correctly).
"DSP OK"
- flashes to indicate DSP has no faults
I
"Fault Accept" button
Press to accept a fault and silence the buzzer
J
"Fault Reset" button
Press to reset a displayed fault
(Note: only available if key switch is turned)
K
"Lamp Test" button
Press to check LEDs and sounder
L
USB port connection
Connection for Configuration Software
