How to View or Change Serial Port address, BVAMC zone position, Fire Panel Interface selection,
and Message configuration.
1.
Insert the key and rotate clockwise.
The display will show the software version, in this example 08.20.
------------------------------------------
| BVR 20 VOICE ALARM Version 08.20 06.09 |
| BALDWIN BOXALL COMMUNICATIONS |
------------------------------------------
2.
Press the Page down key.
The display warns you that you have accessed the set up program.
------------------------------------------
| *****************WARNING**************** |
| YOU HAVE ACCESSED THE SET UP PROGRAM ! |
------------------------------------------
3.
Press the Page down key again.
The display invites you to enter an output channel number 1-31 that you wish to set up.
------------------------------------------
| OUT 00 VOLUME & EQUALISER SETTINGS |
| Enter output no required Press page down |
------------------------------------------
4.
Press the Page down key again.
The display invites you to enter an input channel number 1-20 that you wish to set up.
------------------------------------------
| IN 00 VOLUME & EQUALISER SETTINGS |
| Enter input no required Press page down |
------------------------------------------
5.
Press 2.
------------------------------------------
| IN 20 VOLUME & EQUALISER SETTINGS |
| Enter input no required Press page down |
------------------------------------------
6.
Press the Page down key again.
The display will step to the 1
st
page of input channel 20.
------------------------------------------
| IN 20|VOL|HP|BASS|600|1K0|2K5|TREB|MODE |
| | 00|00| +12|-12|+06|-06|+12 | 00 |
------------------------------------------
7.
Press the Page down key again.
The display will step to the 2
nd
page of input channel 20.
------------------------------------------
| IN 20|ATTENUATOR| COMPRESSOR |CHIME |
| |.00|....00|Off
|Off |
------------------------------------------
