Baldwin Boxall Adept AR10, Operating Instructions Manual, Page: 3 / 8

3
ARM MODULE
Floating Line Output
Rated Output Level
: 0dBM (0.775V)
Maximum Output Level : +6Dbm (1.4v)
Output Source Impedance : 130 Ohms
Distortion (1KHz rated output) : Less than 0.1%
Frequency Response -3dB : 30Hz - 20KHz
Output Noise (no input selected ref rated output) : Better than 80dB
Night Volume Level Reduction adjustable from : 0 - 26dB
Module Current Consumption with no inputs accessed : 20mA
Module Current Consumption with 9 inputs accessed : 62mA
AR10 MAIN FRAME
Supply Voltage AC Supply 50 - 60Hz : 220 - 240V
DC Supply : 23 - 30V
Fuse Protection AC 5 x 20mm : 2A (T)
DC 6.3 x 31.75mm : 3A (F)
Battery 6.3 x 31.75mm : 3A (F)
Terminations AC Supply Input : 3 Pin DIN-IEC6A
DC Supply (Battery) : 3 Pin Screw Terminated Connector
Signal Input (10 off) : 240 Deg 5 Pin DIN Locking
Dimensions Depth (Front to Rear) : 380mm (15”)
Width (Rack Mounted) : 428.6mm (19”)
Height : 88mm (3.5”) 2 Unit
Weight : Approx 5 Kgs
The 25 way D connector is mounted at the rear of the ARM module.
PIN FUNCTION
1 Line level 0dBM output balanced
2 Line level 0dBM output balanced
3 Night volume reduction Connect to 0V to reduce output level
4 Priority 9 Select Connect to 0V to select priority 9
5 Priority 2 Monitor output
6 Priority 1 Acknowledge Connects to 0V when priority 1 selected
7 Priority 2 Acknowledge Connects to 0V when priority 2 selected
8 Priority 3 Acknowledge Connects to 0V when priority 3 selected
9 Priority 4 Acknowledge Connects to 0V when priority 4 selected
10 Priority 5 Acknowledge Connects to 0V when priority 5 selected
11 Priority 6 Acknowledge Connects to 0V when priority 6 selected
12 Priority 7 Acknowledge Connects to 0V when priority 7 selected
13 Priority 8 Acknowledge Connects to 0V when priority 8 selected
14 Busy Lamp/relay output Connects to 0V when ARM module is busy
15 0 Volts Common 0V for selection switches
16 + 24 Volts 24V for lamps etc.
17 Priority 1 monitor output
18 Priority 1 Select Connect to 0V to select priority 1
19 Priority 2 Select Connect to 0V to select priority 2
20 Priority 3 Select Connect to 0V to select priority 3
21 Priority 4 Select Connect to 0V to select priority 4
22 Priority 5 Select Connect to 0V to select priority 5
23 Priority 6 Select Connect to 0V to select priority 6
24 Priority 7 Select Connect to 0V to select priority 7
25 Priority 8 Select Connect to 0V to select priority 8