CODE CHANGING
TROUBLE SHOOTING
B. All Outlets:
1. Press the ”ALL OFF” button on the remote control for about 7
seconds, until the light on the outlets will flash slowly
2. All outlets are currently decoded.
If outlet sockets do not respond:
1) Try to go closer; you might be too far away.
2) Hold the button on the remote for at least 2 seconds.
3) Check if battery needs to be replaced.
WORKING PARAMETER
Working Voltage: 230Vac 50Hz (EU Plug) 120Vac 60Hz(US Plug)
Working Current:16A (EU Plug) 10A(US Plug)
Max power of Socket :3680W(EU Plug) 1200W(US Plug)
Socket Standby Power
≦
50mW
Remote Control Distance:up to 30m(without any RF Disturbance)
Transmission Frequency :433.92MHZ
Working Temperature:-10
℃
to 50
℃
Storage Temperature:-20
℃
to 70
℃
Voltage of remote control:2xAAA
1. Press the ON/OFF button on the outlet for above 5 seconds. The light
on the outlet will flash slowly, then flash quickly for 2 seconds when
code cleared.
2. The outlet indicator light will flash slowly, press any desired ON/OFF
on the remote. The light on the outlet will flash quickly for 2 seconds,
your socket is now programmed to that channel on your remote.
3. More outlets can be programmed to the specific channel of a remote
as you desired, so they can be powered on/off by one press of certain
on/off button. Just repeat the code learning steps for setting.
