18
Allow the main unit and the sensor together at the same position for
30 minutes to establish a strong connection.
Note:
15. TROUBLE SHOOTING
Problem
Outdoor reading
is flashing or
showing dashes
Press and hold the "▲/CH " button for 5-6 seconds to
reconnect the sensor ( (Please switch the channel of the
out door sensor to CH1). If the issue can not be solved,
please try to restore factory settings.
No outdoor
sensor reception
Put put the main unit and outdoor sensor together, and
then press and hold the "▲/CH " button for 5-6 seconds to
reconnect the sensor. If the issue can not be solved, please
try to restore factory settings.
RCC function
does not work
Put to the the main unit close to the window or take it to
outdoor to enhance the signal reception.
Inaccurate
weather forecast
The weather forecast is an estimate or generalization of
weather changes in the next 12 to 24 hours, with an
accuracy rate of about 70-75%. It is simply a tool for
projecting weather conditions and is never to be relied
upon as an accurate method to predict weather.
Possible Solution
Inaccurate
temperature/
humidity
When the temperature/humidity is inaccurate, it is often
due to the location of the display or overpowered/under
powered batteries. You can test the accuracy at you home.
Side-by-side test: Bring the sensor in the house and place
it next to the weather station for 2 hours.
1. Temperature: Compare indoor and outdoor temperature.
The temperature should be within 3.6℉ to be within tolerance.
2. Humidity: Compare indoor and outdoor humidity. The
temperature should be within 5%RH to be within tolerance.
