BALDR B0359WST2H2PR-V1, User Manual

Page: 15 / 92

15
TROUBLE SHOOTING
Problem
Outdoor reading is
flashing or showing
dashes
No outdoor sensor
reception
Inaccurate
temperature/
humidity
Flashing of the outdoor reading is generally an
indication of wireless interference.
1. Bring both the sensor and display indoors, side
by side and remove batteries from each.
2. Make sure the 1-2-3 switch on both units match.
3. Reload batteries in outdoor sensor.
4. Reload batteries in main unit.
5. Let both units sit within a couple feet of each
other for a few minutes to gain a strong
connection before taking sensor to outdoor area.
1. Reload the batteries of both outdoor sensor and
main unit. Please refer to the SENSOR SETUP
section.
2. Relocate the main unit and/or the outdoor sensor.
The units must be within 100m(328ft) of each
other.
3. Make sure both units are placed at least 0.9 m
(3 ft) away from electronics that may interfere
with the wireless communication (such as TVs,
microwaves, computers, etc).
4. Use standard alkaline batteries. Do not use
heavy duty or rechargeable batteries. NOTE: It
may take a few minutes for main unit and sensor
to synchronize after batteries are reloaded.
Possible Solution
Make sure both the main unit and sensor are placed
out of direct sunlight and away from any heat
sources or vents.
“HH.H/LL.L” display
in indoor and/or
outdoor
temperature
If the temperature is higher than the detection range,
“HH.H” will display on screen for indication; if lower
than the detection range, “LL.L” will display on
screen for indication.
EN