TROUBLE SHOOTING
No outdoor
sensor reception
1. Reload the batteries of both outdoor
sensor and main unit. Please refer
to the SENSOR SETUP section.
2. Relocate the main unit and/or the
outdoor sensor. The units must be
within 100m(328ft) of each other.
3. Make sure both units are placed at
least 0.9 m (3 ft) away from
electronics that may interfere with
the wireless communication
(such as TVs, microwaves,
computers, etc).
Problem
Outdoor reading
is flashing or
showing dashes
Flashing of the outdoor reading is generally an
indication of wireless interference.
1. Bring the sensor and main unit indoors,
side by side and remove batteries from
each.
2. Make sure the CH 1-2-3 switch on both
units match.
3. Reload batteries in outdoor sensor.
4. Reload batteries in main unit.
5. Let both units sit within a couple feet of
each other for a few minutes to gain a
strong connection before taking sensor
to outdoor area.
Possible Solution
16
