background image

LIMITED WARRANTY 

 

Unless otherwise provided, Baldor generators are warranted against defects in Baldor workmanship and 
materials for a period of time as set forth in the Warranty Period chart on the following page.  All warranty 
claims must be submitted to a Baldor Generator repair facility prior to the expiration of the warranty period.  
Baldor Generators shall have no responsibility or liability for any defect, latent or otherwise, discovered after 
the expiration of the warranty period provided herein.  Extended warranties are available for certain Baldor 
products.  These warranties are described in Baldor’s catalog and other sales literature.  Extended warranties 
are subject to the terms and conditions of this Limited Warranty as modified by the additional terms of the 
extended warranty.  If a Baldor product is defective due to Baldor workmanship or materials and the defect 
occurs during the warranty period, then Baldor will either repair the product or replace it with a new one, 
whichever Baldor believes to be appropriate under the circumstances.  Warranty service is available for all 
Baldor Generator products from Baldor Generators’ Customer Service Department in Oshkosh, Wisconsin, 
and from Baldor Generator repair facilities.  A list of Baldor’s generator repair facilities may be obtained by 
contacting Baldor Generators at:  Customer Service, Baldor Generators, 3815 Oregon Street, Oshkosh, 
Wisconsin 54902, 920-236-4200 (telephone), 920-236-4219 (facsimile).  All Baldor products requiring warranty 
service shall be transported or shipped freight pre-paid, at the risk of the party requiring warranty service, to 
Baldor Generators’ Customer Service Department in Oshkosh, Wisconsin, or to a Baldor Generator repair 
facility.  Written notification of the alleged defect in addition to a description of the manner in which the 
Baldor generator is used, and the name, address and telephone number of the party requiring warranty service 
must be included.  Baldor is not responsible for removal and shipment of the Baldor product to the service 
center or for the reinstallation of the Baldor product upon its return to the party requiring warranty service.  
Customers who are unable to take or ship the Baldor product to a Baldor Generator repair facility, or who 
desire a repair to be made by other than a Baldor Generator repair facility, should contact Baldor Generators’ 
Customer Service Department at 920-236-4200.  Baldor, in advance of such service, must approve a repair by 
anyone other than a Baldor Generator repair facility in writing.  Problems with Baldor products can be due to 
improper maintenance, faulty installation, non-Baldor additions or modifications, or other problems not due to 
defects in Baldor workmanship or materials.  If a Baldor Generator repair facility determines that the 
problem with a Baldor product is not due to defects in Baldor workmanship or materials, then the party 
requiring warranty service will be responsible for the cost of any necessary repairs.  Parties requiring 
warranty service not satisfied with a determination that a problem is outside of warranty coverage should 
contact Baldor Generators’ Customer Service Department at 920-236-4200 for further consideration.  
EXCEPT FOR THE EXPRESSED WARRANTY SET FORTH ABOVE, BALDOR GENERATORS 
DISCLAIMS ALL OTHER EXPRESSED AND IMPLIED WARRANTIES INCLUDING THE IMPLIED 
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MECHANTABILITY.  NO OTHER 
WARRANTY, EXPRESSED OR IMPLIED, WHETHER OR NOT SIMILAR IN NATURE TO ANY OTHER 
WARRANTY PROVIDED HEREIN, SHALL EXIST WITH RESPECT TO THE GOODS SOLD UNDER 
THE PROVISIONS OF THESE TERMS AND CONDITIONS.  ALL OTHER SUCH WARRANTIES ARE 
HEREBY EXPRESSLY WAIVED BY THE BUYER.  UNDER NO CIRCUMSTANCES SHALL BALDOR 
GENERATORS BE LIABLE OR RESPONSIBLE IN ANY MANNER WHATSOEVER FOR ANY 
INCIDENTAL, CONSEQUENTIAL OR PUNATIVE DAMAGES, OR ANTICIPATED PROFITS 
RESULTING FROM THE DEFECT, REMOVAL, REINSTALLATION, SHIPMENT OR OTHERWISE.  
This is the sole warranty of Baldor Generators and no other affirmations or promises made by Baldor 
Generators shall be deemed to create an expressed or implied warranty.  Baldor Generators has not 
authorized anyone to make any representations or warranties other than the warranty contained herein. 

 
 
 
 
 
 
 

 

Summary of Contents for MAH30






































Reviews: