Baldor Electric Company
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.646.4711, Fax (1) 479.648.5792, International Fax (1) 479.648.5895
www.baldor.com
© Baldor Electric Company
MN909
All Rights Reserved. Printed in USA.
9/03
GA11 − Installation
Hinge
Wheel Guard
Mounting Screw
Mounting Arm
Clamp
Shatter Resistant
Eyeshield
Baldor GA11 eyeshield is furnished with a mounting arm of round steel which is U−shaped at
the mounting end. The slot in the U bend is sized for 5/16” diameter screw. This slot slides over
a screw which is tapped into the inside of the guard. The mounting arm is held in position with a
metal clamp, supplied with the eyeshield as standard equipment. The Baldor GA11 eyeshield may
readily be mounted onto any make tool grinder,and anywhere else a 5/16” or smaller screw can be
used to hold the clamp and arm supplied with each eyeshield as standard equipment. Drawing at
right shows mounting fittings and method of attaching eyeshield.
