Important information
Read the user manual before using for the first time.Because of the wheelchair’s complex
construction there may be a risk of getting fingers etc. caught in the event of unintentional use.
Turn off the wheelchair if it is to stand unused for an extended period. It must not be discon-
nected on a sloping surface as it may roll. Take care on slippery or uneven surfaces.Take care
when using in traffic and never let anyone stand or sit on the chair with you.
Lowering the seat back
The seat back may be lowered so that the wheelchair takes up less space during transpor-
tation.
1. Remove back cushion; this is fastened with velcro.
2. Remove back cover; loosen the screw with 5mm Allen key, remove screw.
3. Lay chassis down; it is fastened with clip and can be easily taken off/put on.
Height when back is down: ca. 75 cm.
Securing wheelchair in a car
Ensure that the wheelchair is always secured during transportation. Always ensure that the
attaching equipment you are using is approved for car transportation.
For fixing during transportation, the rings on the wheelchair should be used as fastening points
for straps.
MAKE SURE YOU
ALWAYS USE THE
ORIGINAL FIXING
EQUIPMENT, IN
ADDITION TO THE
EQUIPMENT THAT HAS
BEEN MOUNTED ON
THE CHAIR.
MAKE SURE THAT
ARMRESTS, WHEELS
AND OTHER
COMPONENTS DO
NOT PREVENT BODY
CONTACT. THERE
MUST BE FULL BODY
CONTACT WITH THE
3-POINT STRAP.
These guidelines cover Balder wheelchairs with standard equipment.
Baldertech AS
Telephone
: +47 32 11 11 00
www.baldertech.com
