Baldan CRI-A, Instruction Manual, Page: 11 / 71

Instruction Manual
9 - CRI-A
INCORRECT USE OF THIS EQUIPMENT MAY RESULT IN SERIOUS OR EVEN FATAL ACCIDENTS. BEFORE PLACING THE IMPLEMENT INTO OPERATION,
CAREFULLY READ THE INSTRUCTIONS CONTAINED IN THIS MANUAL. ENSURE THAT THE PERSON RESPONSIBLE FOR THE OPERATION HAS BEEN
INSTRUCTED ON THE CORRECT AND SAFE USE, HAVING READ AND UNDERSTOOD THIS MACHINE’S INSTRUCTION MANUAL.
WARNING
01- 01- When operating with the equipment, prevent people from staying too close to or over the implement.
02- 02- Use gloves during the mounting or dismounting in the disc sections.
03- 03- Relieve the pressure of the circuit when switching the hydraulic hoses on or off.
04- 04- Periodically check the state of conservation of the hoses. Immediately replace it in the case of leaks because the oil operates at high pressure
and can cause serious injuries.
05- 05- Do not use loose clothing as it can get caught on the equipment.
06- 06- When activating the tractor engine, be properly seated on the operator seat and have complete knowledge of the correct and safe handling of
the tractor as well as the equipment. Always keep the gear stick in the neutral position, switch o the power take-o control gearing and place the
hydraulic controls in the neutral position.
07- 07- Do not start the tractor engine in a closed setting without suitable ventilation because the exhaust gases are dangerous to health.
08- 08- When maneuvering the tractor to the coupler of the equipment, make sure there is enough space and no one too close to it, always maneuver
in reduced speed and be prepared to brake in an emergency.