1. The actual Unit of Measure is flashing when the
Programming Mode is entered.
2. Press the button to toggle between the four
options; PT, QT, GAL, L.
3. When the desired unit of measure is displayed,
press the button. The Unit of Measure icon
stops flashing.
Programming Version 18 or higher
To change the factory settings:
1. Push and hold at the same time the and buttons.
2. PrG will appear on the display.
3. Release the and buttons.
4. Then press and release in order the , , ,
and the buttons
5. The current unit of measure will now be flashing indicating that
you have entered the programming mode.
Change Unit of Measure
The meter comes with an option to choose 4 different Units of Measure.
Scale Factor Digits
Unit of
Measurement
Programming
Display
4. If L, (Liters), is selected, the decimal point begins to flash.
• You now have the option to change the decimal point to either a period or a comma.
• To do this, press the button.
5. If no Scale Factor changes are necessary, refer to the Save Changes section of this manual.
Changing the Unit of Measurement from metric to English or from English to metric
clears the Re-settable Total and Accumulated Total.
13
