Large Rooftop Tent
9
(USA) 800 372 5715
After Sales Support
www.balcolifestyle.com
Model number:
OU190059
02/2021
3.
According to the direction and size of the roof
rack, loosen the screws, and adjust the direction
and distance of the two-connecting tubes on
the bottom of the tent, then tighten the screws.
4.
Place the tent on the roof of the car and adjust
the tent to an appropriate position on the car
roof.
Note: Make sure that the boot door can be opened
without hitting the tent.
5.
Once you are happy with the position, slide the
M8 x 50 bolts to the appropriate position from
the end of the connecting tube. There needs to
be one bolt on each side of the rack.
Note: If the distance between the roof rack and the
car roof is less than 4cm the short bolts (M8 x30) will
need to be used instead of the longer M8x50 bolts.
6.
The bolts pass through the hole of the u – shape
fixing plate, flat washer then spring washer in
the proper order, then tighten the M8 self-
locking nut using a ratchet wrench. This needs
to be done on four corners, respectively.
7.
Insert the plastic cap (30x30cm) into the end of
the connecting tubes.
Operation