Balboa GS523DZ, Usage Instructions

Page: 17 / 36

16
5. Action Required
The control panel will be disabled until power returns. Spa settings will be preserved until next power up.
After the pump has been running for 2 minutes, the temperature will be displayed.
DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. Once the heater has cooled, it
re-set by pushing any button. If spa does not reset, shut off the power to the spa and call your dealer or service
organization.
DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. At 107°F/42°C, the spa should
automatically reset. If spa does not reset, shut off the power to the spa and call your dealer or service organization.
No action required. The pump and blower will automatically activate regardless of spa status
If the problem persists, contact your dealer or service organization. (May appear temporarily in an overheat
situation and disappear when the heater cools.)
If the problem persists, contact your dealer or service organization. (May appear temporarily in an overheat
situation and disappear when the heater cools.)
If the problem persists, contact your dealer or service organization.
Check water level in spa. Refill if necessary. If the water level is okay, make sure the pumps have been primed. If
problem persists, contact your dealer or service organization.
Follow action required for “ ” message. Heating capability of the spa will not reset automatically; you may
press any button to reset.
Check water level in spa. Refill if necessary. If water level is okay, make sure the pumps have been primed.
Press any button to reset, or this message will automatically reset within 15 minutes. If problem persists, contact
your dealer or service organization.
Follow action required for “ ” message. Spa will not automatically reset. Press any button to reset.