H
12:00 AM
R O
F
1
3
C
100
Heat
Spa
Light 1
Settings
H
12:00 AM
R O
F
1
3
C
Ready
High
Heat Mode
Temp Range
M8
Settings
12:00 AM
Heat
Time
Reminders
Locks
Heat
Spa
Light 1
Settings
H
12:00 AM
R O
F
1
3
C
Ready
High
Heat Mode
Temp Range
M8
Settings
12:00 AM
Heat
Time
Reminders
Locks
Heat
Spa
Light 1
Settings
H
12:00 AM
R O
F
1
3
C
Ready
High
Heat Mode
Temp Range
M8
Settings
12:00 AM
Heat
Time
Reminders
Locks
H
12:00 AM
R O
F
1
3
C
100
H
12:00 AM
R O
F
1
3
C
100
H
12:00 AM
R O
F
1
3
C
100
H
12:00 AM
R O
F
1
3
C
100
SPA TOUCH™ mini - quick tip -
Panel overview
SPA TOUCH™ mini - quick tip -
set time of day
SPA TOUCH™ mini - quick tip -
activate filter cycle 2
SPA TOUCH™ mini - quick tip -
activate sleep mode
SPA TOUCH™ mini - quick tip -
set temperature
SPA TOUCH™ mini - quick tip -
set time for filter cycles
SPA TOUCH™ mini - quick tip -
change heat settings
Keep your spa heated and ready to enjoy, or keep it cool and
save energy. Heat settings help you do both.
Follow these steps to change the heat settings:
1 - Go to the Main menu (C), Settings (D), and Heat (E) to view
the Heat screen (F).
2 - Choose your settings (G)(H)( I ). Changes take effect
immediately. No need to press a save button.
HEAT MODE (G)
There are three heat modes: Ready, Rest, Ready-In-Rest. If your
spa is in Ready mode, “R” appears here (B). Ready mode keeps
the water temperature close to the Set Temperature 24 hours
a day. If you use your spa consistently, select Ready mode. If
your spa is in Rest mode, “ IR” appears here (B). Rest mode only
heats the water during filter cycles. If you do not use your spa
consistently, select Rest mode. If your spa is in Ready-In-Rest
Mode, “RR” appears here (B). Ready-in-Rest Mode is the same
as Rest Mode, except Ready-in-Rest Mode heats the water, if
necessary, for one hour when you turn On Jets 1. If the spa is
in Ready-in-Rest mode and you go to the Heat screen (F), that
cancels Ready-in-Rest Mode and puts you back into Rest Mode,
even if you press no buttons while on the Heat screen.
TEMP RANGE (H)
There are two temperature ranges: High, Low. If your spa is in
High Range, “H” appears here (A). High Range may limit the Set
Temperature range to 80° - 104° F (26.5° - 40.0° C).
If your spa is in Low Range, “L” appears here (A). Low Range may
limit the Set Temperature range to 50° - 99° F (10.0° - 37.0° C).
M8 ( I )
M8 looks for opportunities to decrease device usage
by evaluating water temperature readings. Stable water
temperatures equal less device usage and less wear
and tear.
Note: M8 is not available on all control systems.
CHANGE HEAT SETTINGS
View the corresponding
video on YouTube.
D
E
F
A
B
I
H
G
SPA TOUCH™ mini - quick tip -
Panel overview
SPA TOUCH™ mini - quick tip -
set time of day
SPA TOUCH™ mini - quick tip -
activate filter cycle 2
SPA TOUCH™ mini - quick tip -
activate sleep mode
SPA TOUCH™ mini - quick tip -
set temperature
SPA TOUCH™ mini - quick tip -
set time for filter cycles
SPA TOUCH™ mini - quick tip -
change heat settings
View the corresponding
video on YouTube.
Press the sleep button (A) to put the panel to sleep. The
black screen (C) indicates that the panel is asleep.
The panel automatically goes into sleep mode when it
is not used for a specified duration. The duration can be
adjusted (view “Screen sleeps after” on page 14). Short
times are recommended because it decreases the
chance of water activating buttons.
Follow these steps to wake the panel:
1 - Press the black screen (C).
2 - If the main screen appears (B) within a few seconds,
you’re done. If this appears (D), go to step 3.
3 - Press “1” (D) then “2” (E).
You can determine if the panel wakes with one touch
or three touches (view “Tap to Wake” on page 14). The
purpose of multiple touches is to make it very unlikely
that water can wake the panel.
ACTIVATE SLEEP MODE
C
D
E
Main Screen
B
A
C
Balboa Water Group
Document No. 42411 Rev. XX - English
User Guide - SPA TOUCH
TM
mini
13
12
Your Single Source Solution