7
Use GUIDE to display the program guide.
Use EXIT to exit out of your cable converter’s
menu and guide.
Use the four directional keys to move the cursor in
the program guide and menu screens.
Use SELECT/OK to choose options,PPV events, and
to tune programs from the program guide.
Use INFO to display current channel and program
information.
Press MENU once to display your cable converter’s
screen menu.
FEATURES AND FUNCTIONS
…Continued
INSTALLING BATTERIES
1. On the back of the Dolphin Remote, remove
the screws that hold the battery cover in place
and lift off the battery cover.
2 Obtain two (2) fully-charged AA alkaline
batteries.
Match the + and – marks on the batteries to
the + and – marks in the battery case, then
insert the new batteries.
3. Press the battery cover back into place, being
careful to align the rubber seal.
4. Replace the screws that hold the cover by
carefully starting each one without tightening it.
Once they are all started, snug up one screw
and then do the same to the screw on the
opposite side of the door. Repeat this in a
crossing pattern until all screws are snug. Do
not over-tighten them. This will assure an
adequate water seal around the battery door.
4. Test the unit by pressing POWER and any mode
key (e.g. AUDIO,VCR, TV, or CBL). If the
batteries are inserted correctly, the LED will
blink once.
NOTE:
Whenever batteries need replacement, the
Dolphin will blink twice with every key press.
Simply replace the batteries and the remote will
be restored to its full functionality, complete
with your favorite settings.
(5)
AA
AA