Instructions for Use
58
Preparing the appliance before
use
Installing the air expulsion tuben
•
Fit the air expulsion tube assembly into
the housing on the top of the appliance
at the back,
Fig. 7
.
In order to fit the expulsion tube assembly
properly in its housing, it is necessary to
slide the sleeve into the positioning slot (as
shown by the arrows on
Fig. 8
).
The diffusion duct,
Fig. 6
, is added when
the tube assembly has been fitted onto the
appliance.
Press the "
Push
" ab (
Fig. 9
,
1.
) and slide
out (
Fig. 9
,
2.
) to remove the assembly
from the appliance.
Installation for the dehumidification and
air purification function
•
Remove the diffusion duct and set the
air expulsion tube to the position shown
in figure
10
.
•
The expulsion tube may also be totally
dismantled if desired.
Fig. 6
Fig. 7
Hueco para la ubicación
del conjunto tubo
expulsor de aire
Fig. 10
Fig. 8
Fig. 9
Installing the air expulsion accessories
for the air-conditioning function
There are a set of accessories used to
expel hot air (see "Description of
accessories").
Installing the suction pad
•
Open the window slightly and position
the diffusion duct between the jamb and
the glaze frame.
•
Close the window as far as possible and
secure it with the suction pad supplied,
Fig. 11
.
Fig. 11
Installing the sliding window / balcony
accessory
•
The sliding window/balcony installation
accessory supplied with your appliance
can also be used (See "Description of
accessories"),
Fig. 12
:
a
,
b
,
c
,
d
. This
accessory can be used for both
horizontal and vertical windows.