background image

en

15

Reduce costs!

If you are using the upper rack
only, or if your dishes are only
moderately dirty, it will normally
suffice to employ a reduced
amount of detergent than
otherwise recommended.

Close the lid on the detergent
compartment.
Press down the lid (1) until it clicks
shut (2).

If you are using detergent in tablet form,
read the manufacturer’s
recommendations on the packaging in
order to 
determine where the tablets should be
placed inside the dishwasher (e.g. in
cutlery basket, detergent compartment,
etc.).
Make sure that the lid on the detergent
compartment is closed, even if you are
using tablets.

auto 3in1

The use of so-called combined detergent
products may make the use of rinse aid
and/or salt unnecessary.
There are currently several types of
combined detergent products available.

3in1: They contain detergent, rinse aid
and salt function.
2in1: They contain detergent and rinse
aid or salt function.

>>> Always check the type of detergent

or combined product which you
are using!

Always follow the operating instructions
or the information on the packaging.

The rinse programme is automatically
adjusted in order to obtain the best
possible rinsing and drying result.
Observe the following important
information if using combined cleaning
products:

Regeneration salt is not required up to
a water hardness of 21

 dH (37

 fH,

26

 Clarke, 3.7 mmol/l) only. No other

settings on the appliance are required.
Salt is still required if the water
hardness is above 21

 dH (37

 fH,

26

Clarke, 3.7 mmol/l). Fill the salt

dispenser with salt 

24

 and select

setting 6 on the water softening system.

If in doubt, please contact the detergent
manufacturer, especially if:

the utensils are very wet at the end
of the programme.
limescale forms.

Summary of Contents for 3VS951BD
































Reviews: