en
18
Changing the programme
When the START button
h
has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme (Reset).
Intensive drying
The final rinse uses a higher temperature
which improves the drying result. The
running time may increase slightly.
(Caution if utensils are delicate!)
–
Open the door.
–
Switch on ON/OFF switch
(
.
–
Hold down button >
P
and press
START button
h
until the End display
`
and salt refill indicator
)*
flash.
–
Release buttons.
–
Keep pressing button >
P
until the
salt refill indicator
)*
and
“Check
water supply”
)2
flash.
–
Release buttons.
The displays
)*
and
)2
flash.
To change the setting,
–
Press button <
H
until the display
#
is lit (Intensive drying on).
–
Press START button
h
.
The displays go out. The setting is
saved.
–
Close the door.
A regular inspection and maintenance of
your machine will help to prevent faults.
This saves time and prevents problems.
Overall condition of the machine
–
Check spray arm for grease and
limescale deposits.
If you find such deposits:
–
Fill detergent dispenser with detergent.
Start the appliance without utensils in
the programme with the highest rinsing
temperature.
Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.
–
Regularly clean door seal with a damp
cloth.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water and a
little washing up liquid are adequate. Do
not use sponges with a rough surface or
abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths or
wash them out thoroughly several times
before using for the first time.
ã=
Warning
Never use other chlorinated household
detergents! Health hazard!
Special salt and rinse aid
–
Check the refill indicators
)*
and
)"
. If required, refill salt and/or rinse
aid.
Maintenance and care
