background image

en

22

The filter on the water supply hose
is blocked.
Switch off the appliance and pull
out the mains plug. Turn off the
tap. Then clean the filter which is
situated at the connection of the
supply hose. Finally, restore the
power, turn on the tap and switch
on the appliance.

... with the appliance itself

Lower spray arm rotates with
difficulty

Spray arm is blocked by small
items or food remains.

Lid in detergent compartment
cannot be closed

Detergent compartment has been
overfilled.
Mechanism is clogged with
remnants of detergent.
Indicator lamps do not extinguish
after washing has finished.

 Indicator lamps do not extinguish
after washing has finished

Main switch is still set to ON.

“Check water supply” display 

7

lights up.

Tap turned off.
Water supply interrupted.
Filter in the water supply blocked.
Supply hose kinked.

Remnants of detergent stuck inside
dispenser

Compartment was damp when it
was filled up with detergent.
Compartment must be dry before
detergent is added.

Water remains inside appliance
after programme has ended

Blockage or kink in drainage hose.
Pump is jammed.
Filters are blocked.
The programme is still running.
Wait for the programme to end.
Perform “Reset” function.

The door opens and closes
incorrectly on appliances which
are designed to be built-in.

The attached door panel is not the
correct weight. Observe the weight
indicated in the enclosed
installation instructions.
Incorrectly set door spring tension.
Set the tension according to step
(point) 

 in the enclosed

installation instructions.

... during washing

Unusual amount of foam is created

Normal washing up liquid has
been poured into the rinse-aid
container.
Remove any spilled rinse aid with
a cloth as it could otherwise lead
to excessive foaming during the
next washing cycle.

Appliance stops suddenly while
washing is taking place

Cut in electricity supply to
appliance.
Water supply has been
interrupted.
Implement the “RESET” function.

Knocking sound can be heard
while washing is taking place

A spray arm is knocking against
the dishes inside the appliance.

Rattling sound can be heard while
washing is taking place

Crockery has not been stacked
properly inside the appliance.

Summary of Contents for 3VF330NP

































Reviews: