16
End of the programme
The washing and drying programmes are ended automatically.
appears on the display panel.
Set the program selector to
Stop
(Off).
Remove the washing from the drum.
Leave the door open so that the inside of the washer-dryer can dry out.
Turn off the tap (not necessary on models with Aqua-Stop).
If the spin function was deactivated at the start of the wash cycle,
$
(no final spin = laundry remains in last rinsing water), the washing
programme is automatically stopped after the final rinse. The display
panel shows
alternating with
.
In order to drain the rinsing water and, if required, spin the laundry:
Press the
B
centrifug. (Spin) button repeatedly until the required spin
speed is set. The water is drained and the washer-dryer spins the
laundry. The programme is completed when
appears in the
display field.
The maximum spin speed depends on the selected wash programme.
If you do
not
wish to spin the laundry:
Set the spin speed to
$
(Rinse hold)
. The water is drained, but the
washer-dryer does not spin the laundry. The programme is ended
when
appears in the display field.
Set the program selector to
Stop
(Off).
Remove the laundry.
Leave the door open so that the inside of the washer-dryer can dry out.
Turn off the tap (not necessary on models with Aqua-Stop).
Childproof lock
For preventing the washer-dryer functions that you have set from being
changed inadvertently.
Activate/Deactivate:
Press the
opc.
and
selec.
buttons at the same time
to activate or deactivate the childproof lock. When the childproof lock is
activated,
@
lights up on the display.
Rinse
i
