a. Press
to return to the Weigh mode.
b. Press
and “Chan A” is displayed.
5. With “Chan A” prompt displayed, press the
key.
The display will show the Channel A baud rate.
NOTE
Do not set a baud rate of 19200 on one channel
and 38400 for another. Any other combination is
acceptable.
Set the Output Format as listed in the following chart.
The
key toggles the operator through the
available options. The
key saves the displayed
options and advances to the next parameter.
B. Programming Chart, Channel A
Baud Rate Options
Displayed Options
300
600
1200
2400
For Models K500, Okidata and
Eaton Ticket Printers
4800
9600
19200
38400
Stop Bits Options
Displayed Options
Stop 1
For Models K500, Okidata and
Eaton Ticket Printers
Stop 2
Parity Options
Displayed Options
EuEn
Odd
For Models Okidata and Eaton
Ticket Printers
nonE
For Model K500 Printer
Character Data Bits Options
Displayed Options
Char 7 (7 bit character)
For Model Eaton Ticket Printer
Char 8 (8 bit character)
For Models K500 and Okidata
Printers
Net Print Options
“gtn”
When in Net mode Gross, Tare
and Net weight is printed
“nEt”
When in Net mode Net weight
only is printed
Formatting: The
key is used to scroll through the
options available at a particular step. The
key
causes the current option to be registered and advances
the program to the next set of options.
After “gtn” or “nEt” has been entered, the display will show
“PtAL 0”. Pressing the
key will toggle the dis-
play between “PtAL 1” and “PtAL 0” (“PtAL” stands for
“Print Alter”). Pushing the
key will cause the in-
strument to revert to the normal weighing mode. Pushing
the
key while the display shows “PtAL 1” will
advance the instrument to the formatting options.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
9
SJ4511
