How to Assemble the Balanced Body
®
CoreAlign
®
Ladder for Wall Mount
PARTS LIST (INCLUDED):
Item
Part Number
Qty
Wall Brackets
616-085
6
10 x 2 1/2” pan head screws
GEN9395
6*
10 x 1” pan head screws
GEN9034
12
6 x 1” flat head screws
GEN9073
16
7/64” drill bit
616-117
1
Long dowels
607-272
4
CoreAlign ladder frame
607-308
1
* Included for attachment of bracket to wall if needed. Wall mounting
instructions are not included.
TOOLS NEEDED (NOT INCLUDED):
»
Drill and
1
⁄
8
” drill bit
»
Phillips screwdriver
Note:
Assembled ladder is 91” (231 cm) tall. Contact Balanced
Body if your ceiling is lower than 91”.
1. Install first long dowel through both legs of ladder as shown
in Figure A.
2. Position and hold dowel with 6 inches
extended on both sides from outside
surface of ladder. Drill dowel with 7/64”
bit through existing hole as shown
in Figure B. Insert #6 screw through
pre-drilled hole in ladder and dowel, and
screw ladder to dowel (Figure C). Repeat
installing 2 screws per dowel. Ladder
with all “rungs” (dowels) installed should
look like Figure D.
IMPORTANT NOTE:
The brackets that hold
the ladder to the wall can be installed for
24” on center studs (Figure E) or 32” on
center studs (Figure F).
The remaining
instructions are for 24” on center studs.
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-181 | 06.29.18
Fig. A
Fig. B
Fig. C
Fig. D
Fig. F
Fig. E
