4. Install the two remaining eyebolts with springs into the rod as
shown in Figure 3. Make sure the loops of the eyebolts are
pointed toward the chair, and that the same color spring is
closer to the chair as on the other side.
Figure 3: Springs omitted for clarity.
5. Using the provided 5/32” Allen wrench, remove the three
screws at the bottom of the chair. Hold the included wheel
bracket up to the three holes and align the holes. Begin
threading all three screws into the chair before tightening any
of them. Then tighten.
6. Your Arm Chair is now ready to use.
QuestioNs?
Call Balanced Body Technical Support at 1-800-PILATES or
+1-916-388-2838.
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-244 | 10.19.12
