12. Take one end of the rope and thread up through the lower
mount pulley. Continue threading the rope up through the
upper, inner pulley on the riser block and pull toward
the carriage. See Figure H.
13. Thread the rope through the pulley attached to the black Tri-
Loop with pulley on the same side of the Reformer as the riser
and pull back toward the riser. See Figure I.
14. Thread the rope through the upper, outer pulley on the riser
block and pull back toward the carriage. See Figure J. See
Figure K for a detailed view of the riser pulley block rope
routing.
15. Using a Soft-Touch connection, see Figure L, secure each
end of the rope to a grey Tri-Loop on the same side of the
Reformer as the riser.
16. Repeat steps 12-15 for the other side of the Reformer.
Figure H
Figure I
Figure L
Figure J
Figure K
3
