Balanced Audio Technology VK-P5 Owner'S Manual Download Page 5 | Manualshive

Page: 5 / 13

Balanced Audio Technology VK-P5 Owner'S Manual Download Page 5

Reseating Tubes

Normally, reseating tubes upon delivery is not required. However, if any tubes have

noticeably drifted out of position due to unusually high transportation stress, it will be
advisable to reseat the tubes. Use the supplied Torx wrench to remove the top cover.
Reseat the tubes in their sockets and reinstall the top cover.

NOTE: When using the Torx wrench, make sure it is fully inserted so that the screw head is
not stripped.

Physical Placement

It is recommended that you provide for at least 6" of free space around the unit for proper
ventilation.

Mount the unit on a hard surface with proper ventilation underneath.

Do not stack the VK-P5 phono stage on top of other units, nor vice versa.

General Description of VK-P5 Phono Preamplifier

The VK-P5 balanced all-tube phono stage is designed to provide the maximum possible
performance while operating in conjunction with the wide verity of phono cartridges available
today. The unit offers high degree of versatility in system configuration by providing the
following features:

- User-selectable gains of 50dB and 56dB

- Selectable cartridge loading for both resistance and capacitance

Please refer to the Configuration Switches section of this manual for information on how to
configure the VK-P5 phono stage for optimal performance in your system.

«
...
3
4
5
6
7
...
»

Summary of Contents for VK-P5














Reviews:

No comments