10
VK-52SE PROGRAMING FUNCTIONS
The VK-52SE programming functions allow the user to optimize the unit configuration for any
particular system set up. The flexible programming facility defines each signal input with a group
of user-selectable parameters that are then stored in the unit’s memory. Every time a particular
input is selected, its unique combination of parameters is loaded into the operating memory.
Programming is easy and is accomplished through using just two front panel controls -: the
Function button and Volume knob, or corresponding remote control buttons (Function and
Volume Up/Down buttons).
Every unit comes from the factory with a default set of parameters stored in its memory. This set of
parameters is usable for many applications. The default set includes the following parameters:
BALANCE
ZERO
RELATIVE VOLUME
ZERO
PHASE
Non-Inverting
MONO/STEREO
STEREO
MAXIMUM VOLUME
140
FIXED GAIN
OFF
DISPLAY
COUNTS
INPUT NAMES
1
TAPE
2
TUN
3
CD1
4
AUX1
5
AUX2
The user may at any time, configure the unit to a particular set of system requirements. For
example, input names can be changed to reflect a given system’s source configuration.