Balanced Audio Technology VK-33SE, Owner'S Manual, Page: 18 / 25

18
DISPLAY MODE programming
The volume display of the VK-33SE can be switched to work in any of the
following three modes:
CNTS: Relative volume counts with the range of 000 to 140
DBU: Decibel readings with respect to unity gain (0dB).
DBM: Decibel readings with respect to maximum gain (20dB)
NOTE: To avoid possible confusion, the SAME display mode setting
applies to ALL inputs. It is not possible, for example, to set one
input to CNTS and another to DBU.
INPUT NAME programming:
The VK-33SE allows the user to assign any a custom name to any input. Those
names may include up to four characters. The default names for the inputs are as
follows:
1 TAPE
2 TUN
3 CD!
4 AUX1
5 AUX2 (It will automatically switch to PH1 if the optional phono card is
installed)
Any combination of up to four Latin, Cyrillic, Greek alphabet characters or digits
can be used to name the source. The examples may include:
CD-2, DVD1, JOHN, VKD5, MARY, BOB1, etc.
To program the input name, do the following:
Select the desired input
Press the Function button eight times. The first character of the input name
will start blinking
Use the volume control knob or the remote control Volume Up/Down buttons
to select the desired character. The characters are organized in the following