Balance Balance KH 5506, Operating And Safety Instructions Manual

Page: 9 / 12

4. The rotating “CCCC” display above the line appears during
the establishment of body weight and water contents.
As soon as the process has been completed the values
established for body fat and water contents alternately
appear on the display.
5. When you step off from the scale the running display
“bALAnCE“and “0.0kg” again appears on the display. The
scale is now ready for the next measurement. If you remain
on the scale, the scale switches off automatically after 60
seconds.
b) Simultaneous establishment of weight, body fat and water contents
1. Press the keys “^” or “v” to select your pre-programmed
storage place (1-10) and confirm by pressing the key
i
.
2. For control purposes, the stored settings “Sex and Age”
followed by “Sex and Size” of the selected storage place
are shown on the display for control purposes.
3. Step on the scale for weighing.
Note: Stand on the metal contacts without shoes or
stockings. Your feet must be clean and dry when you
step on the scale. However, very dry feet can affect the
measurement. In this case, moisten your feet with a
moist cloth and repeat the measurement.
4. The weight is now established on the display under the line
while the “H” is flashing as described before. As soon as it
stops flashing the established weight will be displayed.
5. The display “CCCC” above the line simultaneously shows
that body fat and water contents are being established. As
soon as these have been established the results will be
displayed alternately.
9
RZ_IB_Köfett_LB4 22.09.2003 11:22 Uhr Seite 9