4
5. Projection:
Press “PROJECTION” button to turn on or off projection function.
When projection function is on, hold “PROJECTION” button for 2 seconds to reverse the
projection content 180°.
Turn the rim to adjust the focus of projection.
6. Backlight
Hold “DIMMER” button (B9) around 2 seconds to select the brighter or darker display or turn
off backlight.
7.
Precautions
Use a pin to press the reset button (B4) if the Unit does not work properly.
Avoid placing the clock near interference sources/metal frames such as computer or TV
sets.
The clock loses its time information when the adapter is removed.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
Never clean the device using abrasive or corrosive materials or products. Abrasive
cleaning agents may scratch plastic parts and corrode electronic circuits
DISPOSAL AT END OF WORKING LIFE:
Discarded appliances and electronic devices often still contain valuable materials, therefore
do not throw them away, instead hand them in to the store where you buy a new appliance
or to your local council recycling depot.
In accordance with the waste guidelines for electrical and electronic equipment, this product
must be disposed of separately. If you wish to dispose of this product in the future, do NOT
discard it with the household waste, but hand it in at your local refuse collection depot.
In compliance with the directives on Waste Electrical and Electronic Equipment, this product
must not be discarded with domestic waste but should be disposed of separately for
recycling. If you wish to dispose of this product in the future, do NOT throw it away with the
household rubbish but hand it in at a specially designated place, such as your municipal
domestic chemical waste depot.
Never throw empty batteries away, but deposit them in special battery boxes or hand them
in as domestic chemical waste at your municipal depot.
