background image

Then the clock will automatically set 1 hour faster from the signal time received.

The time setting mode will automatically exit in 15 seconds without any adjustment.

12/24 Hour Display mode:

Press “12/24” button (B10) to select 12 or 24 hours mode.

2 Daily Alarm Function:

Press “ MODE/SET” button (B1) to select to view:

Time     Alarm Time1 (“

“ Shown on the LCD)      Alarm Time 2 (“

“ Shown on the

LCD)

When viewing Alarm Time 1 or Alarm Time 2, hold “MODE/SET” button (B1) for 3 seconds

to enter that Alarm Time setting. Press “ +” (B10) or “-” (B11) buttons to adjust the alarm time.

Press “MODE/SET” button (B1) to confirm each setting.

When viewing Alarm Time 1 or Alarm Time 2, press “ALARM” button (B2) to switch that

alarm ON or OFF.

Press “MODE/SET”(B1), “+”(B10), “-“(B11) button to stop the alarm.

Moon Phase and Tide Indication

The Moon Phase of each day is shown on the LCD.

  A:  New  Moon                           B:  Waxing  Crescent                       C:  First  Quarter

  D:  Waxing  Gibbous                   E:  Full  Moon                                 F:  Waning  Gibbous

  G:  Last  Quarter                         H:  Waning  Crescent

Tide Status :

  H  :  High  Tide                             M:  Medium  Tide                           L:  Low  Tide

Low batteries indicator:

Low battery icon “

“ (A14) appear at outdoor temperature row in particular channel

Summary of Contents for 865373












Reviews: