UltraBoard 940
Compact Keyboard
Pairing the Ultraboard Keyboard in Mac OS X
1. Open the Bluetooth assistant by opening the System
Preferences Bluetooth.
2. Make sure that Bluetooth is activated (Bluetooth: On)
3. Press the pairing button on the back of the Ultraboard Keyboard.
The LED flashes until a connection has been established.
4. Click the “+” tab (set up new device) in the lower left hand
corner so that the Bluetooth assistant searches actively for
new Bluetooth devices.
5. On the right side in the list of “Devices”, you should see the
entry “Ultraboard Keyboard”
6. Press “Connect”; You will get an 8-digit code on your screen.
Enter the 8-digits on your Ultraboard Keyboard and press
the “Enter” key on the Ultraboard Keyboard. The connection
should be established and you see the “Ultraboard Keyboard”
entry in the list of active Bluetooth devices.
Holding Fn key and press “A” key for Mac OS
• Function keys F1, F2, F3, F4 support Mac OS X for decreasing
and increasing brightness, expose and dashboard.
F1 Decrease brightness
F2 Increase brightness
F3 Expose
F4 Dashboard
• Use Multi-media function keys by holding Fn key and F7, F8,
F9, F10, F11, F12 keys down at the same time for Rewind,
Play/Pause, Fast Forward, Mute, Volume Up/Down.
F7 Rewind
F8 Play/Pause
F9 Fast Forward
F10 Mute
F11 Volume Down
F12 Volume Up
To use the Ultraboard Keyboard function keys in Mac OS,
change OS setting to Mac OS (default is Windows OS)
Make sure that you have Bluetooth support on your Macintosh™ and Mac OS X 10.5.x or higher installed. The Ultraboard
Keyboard may work with older Mac OS X but it is not officially supported.
Assume Mac OS is 2
nd
Bluetooth host; Register Ultraboard Keyboard to 2
nd
Bluetooth host by holding “Fn” key and press “2” key
with symbol. LED status indication will flash blue 3 times or more while connecting to pre-set Bluetooth host.
