LP Gas Cylinder Placement
Ensure the LP Gas Cylinder is placed at least 24in (61cm)
away from the appliance on a level and stable surface
[See Figure - 6].
Take care to place the LP Gas Cylinder where it will not
present a trip hazard.
WARNING: Read and follow all instructions and warnings
listed on prior pages before attempting to use the
appliance.
LIGHTING INSTRUCTIONS
Step 1
Turn on the gas tank valve.
Step 2
Push and turn one of the burners to (HIGH) [see
Figure - 7] while pressing and holding the (IGNITION)
button [See Figure - 8].
Step 3
Once burner lights release the (IGNITION) button.
Step 4
Repeat procedure for second burner.
Step 5
WARNING: If the ignition does not light within 5
seconds, turn the burners to (OFF) and wait 5 minutes for
any gas
to dissipate. Repeat prior steps or light using a match.
Step 7
After burners are lit, adjust the flame as desired
between and .
MATCH LIGHTING
If the appliance does not light using the steps above a
match may be used to light the appliance.
Step 1
Turn on the gas tank valve.
Step 2
Attach a match to the lighting rod and light the
match.
Step 3
Insert the match through the side of the firebox
towards the burner [see Figure - 9] and immediately turn
one of the burners to (HIGH).
Step 4
Burner should light immediately. If the burner does
not light, turn off the burners and gas valve on the tank and
wait 5 minutes before trying again.
HOW TO TURN OFF APPLIANCE:
Step 1
Rotate both burners to the (OFF) position
[see Figure - 10].
Step 2
Turn off the gas supply.
WARNING: Turn off and disconnect gas supply when not in
use.
12
Figure - 8
Ignition Button
Match light hole
Figure - 9
Figure - 7
Burner Control Knob
Figure - 10
Figure - 6
24in
(61cm)
Product Guide
